1,Equipment function and composition
Autoclave is the key equipment of the laminated glass production , it can bond laminated glass firmly together through heat, pressure, cooling process,The equipment is composed of heating, cooling system and after insulation of the autoclave body and control system.
2 ,the main technical characteristics
I energy-saving: the power is lower than traditional autoclave 60-100 - kw, energy saving 30%, the entire process shorten, energy saving is obvious.
II fireproofing: according to the specified technological process operate,
Using ghe specified cushion materials,which can prvent the fire accident.
III fast: rapid autoclave speed significantly faster than conventional autoclave
IV clean: no soot pollution, no noise,it realize clean production.
V: strong: sealing, cooling, kettle door repair rate reduced by 90%. PLC-touch screen control, easy to operate.
3 ,control system characteristics and security Settings
(1)It is equipped with automatic and manual operating system. When theparameter setting, it will operate automatically whole course. It can be transferred to manual operating system
(2) adjustable control system, the user can adjust processing parameters in time according to the actual number and thickness of the glass
(3)It is equipped with manual chain and mechanical safety valve, it can ensure the kettle inside has air,and can not open the door, when it overpressure, safety valve will exhaust automatically.
(4) It is equipped with automatic chain,when the pressure sensors detect the pressure inside the kettle, it will disconnect the line cord automatically.it can ensure exhaust automatically when no pressure transmission, overpressure ,overtemperature after solenoid valve.
(5) It can start running when shut down the wrong tooth in place,.
4the main equipment materials:
A kettle door: 16 mn forging
Body:Q345R
heater: medium wave infrared heating tube
sealing system : rubber sealing ring
heat preservation material: cotton salt and aluminum silicate
cooler: seamless steel tube fin tube overall hot galvanized
Technical parameters
(1) the autoclave body steel shell effective inner diameter: 2650 mm ,processed glass maximum width: 2240 mm (small)
(2) the maximum length of processing glass: 6000 mm , processed glass minimum size: 350 * 350
(3) working pressure: 0-1.25 Mpa ,safety valve cracking pressure: 1.3 Mpa
(4) working temperature: 0-135 C ,design temperature: 150 C
(5) working medium: compressed air
(6),gauge inside the kettle: 1000 mm (according to customer's requirement)
(7),insulation way: internal thermal insulation, the thickness is 50-100mm
(8),the open way: electric hydraulic, left open the door (facing the kettle door to the left) right to open the door